PRESSING INSTRUCTIONS

For our patches: 

Temp: 320 - 375 depending on your heat press Cover with Teflon or parchment paper Pre-press garment 5-10 seconds to remove moisture and/or wrinkles

Press Time: 15-20 seconds

Pressure: Heavy 

For our DTF transfers:

DTF Transfers can be applied to any materials. Press at 320 degrees Fahrenheit for 14-15 seconds. If you are applying to a hat I do 30 seconds. 60 PSI 5BAR pressure. High pressure. COLD PEEL ONLY. Wait 30-40 seconds or until it is cool to peel.

We recommend cutting slits into your transfer if you are applying to a curved surface such as a hat. This will allow the transfer to lay flat against the curve better and help with transferring to the hat. 

Please note: We are not responsible for any transfers or patches transferred incorrectly, or for any damaged that occur to your prints or to your hats or t shirts once you apply them. Please see our pressing instructions before you press.